How do I attach my Prestige plates?

Before attaching to the vehicle, position your Prestige Plates, with the attached mounting bracket, on the vehicle to ensure alternative brackets are not required (stand-off type). A different mounting method may be required if there is a substantial curve or restrictive recess in the vehicle’s design.
Separate the mounting bracket from your Prestige Plate by loosening the three grub screws (located on the bottom edge of the frame) with the Allen key provided. With the plate facing down, remove the mounting bracket by lifting out the bottom section of the bracket first. NB, the top section cannot lift up as it slides in.
Hold the mounting bracket in its desired position on the vehicle and attach it securely through the slots provided with two screws and washers (NB, the screws and washers are not provided. You will need to purchase these items. The combined screw head height and washer thickness should not exceed 4mm to ensure they fit between the plate and the mounting bracket).
Insert the top lip at the back of your Prestige Plate into the slot at the top of the mounting bracket. Your plate should now hang from the bracket and the bottom lip of the bracket should be aligned with the slot in the bottom of the plate frame.
Push the bottom lip section of the mounting bracket into the plate frame. You should hear a click.
Re-tighten the grub screws to firmly hold the assembly together.